1. Material optionsVXC construction details

  • Heavy-gauge hot-dip galvanized steel is used for external unit steel panels and structural elements featuring Baltiplus 800TM Corrosion Protection.
  • The Baltiplus 810TM coating is an optional extra. A hybrid polymer coating for longer service life, applied pre-assembly to all hot-dip galvanized steel components of the unit.
  • Optional stainless steel panels and structural elements of type 304 or 316 for extreme applications.
  • Or the economical alternative: a water-contact stainless steel cold water basin. Its key components and the basin itself are stainless steel.

2. Heat transfer media

  • BAC coilOur heat transfer media is a condensing coil. In comprehensive lab thermal performance tests, it showed proved thermal cooler performance and offers you unrivalled system efficiency.
  • The coil is constructed of continuous length of prime surface steel, hot-dip galvanized after fabrication. Designed for maximum 18 bar operating pressure according to PER. Pneumatically tested at 26.5 bar.

Try our VXC coil options:

  • Multiple circuit coils (split coils) for your halo carbon refrigerants, maintaining individual compressor systems. Or use it for compressor jacket water or glycol cooling.
  • Stainless steel coils are in type 304L or 316L.
  • High pressure coils are designed for 28 bar operating pressure and pneumatically tested for 40 bar. Hot-dip galvanized after fabrication.

All coils are designed for low pressure drop with sloping tubes for free drainage of fluid.


3. Air movement systemFan drive system

  • With motor-driven centrifugal fan and a V-belt drive.  You can easily remove the entire motor base for proper belt tensioning to ensure constantly correct belt alignment. Together with the heavy duty fan shaft bearings this guarantees optimal operational efficiency. Single- and multi speed available.
  • Centrifugal fan(s) are forward-curved and nearly noiseless. Overcome external static pressure! Use sound attenuators and duct work etc. for air intake/discharge with no loss of thermal performance!
  • Our drift eliminators come in UV-resistant plastic, which will not rot, decay or decompose and their performance is tested and certified by Eurovent.  They are assembled in easily handled and removable sections, for optimal internal access.
  • Steel eliminators, protected with the Baltiplus 810TM coating, for optimal corrosion protection, are also available for specific applications.

4. Water distribution system

Water distribution systemThese consist of:

  • A header and spray branches with wide non-clog plastic nozzles, secured by rubber grommets. You can easily remove, clean and flush both nozzles and spray branches.
  • A cold water basin with:
    - strainers which are easy to lift out and the anti-vortexing device also helps stop trapped air
    - mechanical make up
    - circular access door
  • Close coupled, bronze fitted centrifugal spray pump with totally enclosed fan cooled (TEFC) motor. Bleed line with metering valve installed from pump discharge to overflow.

Like to know more about the VXC construction details? Contact your local BAC representative.